Facade Systems
Exposed Fastener Rainscreen System
System Depth = 1” + Zee Girt
Joint Width = 3/8”
 
System Components:
1.    Trespa®  Meteon® Panel
2.    Universe Aluminum J-Extrusion – Black Color
3.    Universe Aluminum Hat-Extrusion – Black Color
4.    Extrusion Fastener
5.    Panel Fastener
6.    Zee Girt 
7.    Mineral Wool Insulation
8.    Air and Moisture Barrier
9.    Sheathing
10.    16 Gauge Min. Steel Stud
 
Notes:
•    Vertically attached.
•    Mineral wool insulation (7) is required and must be the same depth as the zee girt (6). 
•    Air & Moisture barrier (8) must be VaproShield® WallShield®, WrapShield®, RevealShield™, Cosella-Dorken Delta® Fassade-S, Delta® Foxx, Delta® Foxx-S, Tyvek® CommercialWrap®, Dow Corning DefendAir 200 or Momentive™ SEC2500-SilShield AWB if mineral wool (7) is less than 2” thick; if mineral wool is thicker than 2” then other barriers may be used.
•    The zee girt (6) is not painted.
•    Painted and decorative Panel Fasteners (5) are available for a premium. 
 
Online Shop